Rear Parking Brake Shoe Set

Premium Emergency Brake Restoration for Infiniti, Nissan, and Suzuki

Restore the holding power and safety of your vehicle’s stationary braking system with this premium Rear Parking Brake Shoe Set. Designed specifically for the "drum-in-hat" internal parking brake configuration found on many Infiniti and Nissan platforms, these shoes are essential for ensuring your vehicle remains securely parked on inclines. Whether your original shoes have been contaminated by axle seal leaks or worn down from accidental engagement while driving, this set provides a direct-fit solution to regain factory-spec tension and performance.

Each shoe is manufactured with a high-friction, heat-resistant semi-metallic compound bonded to a reinforced steel core. This ensures structural integrity under the high mechanical pressure of the parking brake cable. The precision-ground friction surface provides an immediate, positive grab against the internal drum of your rear rotor, reducing the need for excessive lever or pedal travel inside the cabin.

Fitment Verification and Vehicle Applications

This set is designed for the Rear Internal Drum position on the following models:

• Infiniti FX Series: 2009–2012 (FX35), 2013 (FX37), 2009–2013 (FX50)

• Infiniti M/Q Series: 2011–2013 (M37, M56), 2012–2013 (M35h), 2014–2017 (Q50), 2017 (Q60), 2014–2019 (Q70, Q70L)

• Infiniti JX/QX Series: 2013 (JX35), 2014–2019 (QX60), 2014–2017 (QX70)

• Nissan Trucks/SUVs: 2005–2019 (Frontier, Pathfinder), 2005–2015 (Xterra)

• Nissan Passenger/Performance: 2003–2007 & 2009–2019 (Murano), 2008–2017 (Quest), 2009–2019 (GT-R)

• Suzuki: 2009–2012 (Equator)

Technical Specifications and Attributes

• Location: Rear (Internal Drum-in-Hat).

• Friction Material: High-Performance Semi-Metallic.

• Core Construction: Reinforced Stamped Steel.

• Surface Finish: Precision Ground for radius matching.

• Operation: Mechanical Cable Actuated.

• Quantity: 4 Piece Set (Includes all shoes required for the rear axle).

What’s in the Box

• (4) Individual Rear Parking Brake Shoes

Industry Cross-Reference Numbers

• Raybestos Brakes: 869PG

• Wagner Brake: Z869

• Nissan/Infiniti: 44060-8J00K, D4060-9N00A

• Bendix: 869

• Centric: 111.08690

Installation and Technical Tips

• Drum Cleaning: Before installing new shoes, use a dedicated brake cleaner to remove all dust and grease from the internal drum surface of the rear rotor. Any oil or residue on the drum will significantly reduce the shoes' ability to hold the vehicle.

• Star Wheel Adjustment: Most Nissan and Infiniti models utilize a manual star wheel adjuster at the bottom of the brake assembly. Adjust the shoes until they just begin to drag against the rotor, then back the adjuster off 2-3 notches to allow the wheel to spin freely.

• Hardware Inspection: Parking brake hardware (springs and pins) is prone to heavy corrosion on high-mileage vehicles. Inspect your springs for tension loss; if they appear stretched or rusted, it is highly recommended to replace the hardware kit simultaneously to prevent the shoes from dragging.

• Cable Tension: If the parking brake handle still feels loose after the shoes are adjusted at the wheels, locate the secondary adjustment nut at the base of the handbrake lever or foot pedal assembly to take up any remaining cable slack.