Front Upper Control Arm with Ball Joint Set

2-Piece Suspension Restoration for 2016–2023 Tesla Model X

Restore the precision handling and structural integrity of your vehicle's front suspension with this premium 2-Piece Front Upper Control Arm Set. Engineered specifically for the Tesla Model X, these arms are designed to manage the high torque and heavy curb weight characteristic of premium electric SUVs. This set addresses common suspension issues such as steering wander, uneven tire wear, and the persistent "squeaking" or "clunking" noises often caused by worn-out bushings or integrated ball joints.

Each control arm is manufactured using high-strength forged materials to ensure maximum durability and weight savings. The pre-installed ball joints and high-durometer rubber bushings are designed to provide a factory-smooth ride while maintaining the rigid geometry required for the Model X’s advanced air suspension system.

Fitment Verification and Vehicle Applications

This 2-piece set includes both the Front Driver Side (Left) and Front Passenger Side (Right) upper arms:

• Tesla Model X (All Trims): 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023.

• Compatibility Note: This set is a direct replacement for all Model X variants, including Long Range, Plaid, and Performance models. It is fully compatible with the vehicle’s Smart Air Suspension hardware.

Technical Specifications and Attributes

• Position: Front Upper (Left and Right).

• Quantity: 2-Piece Set.

• Construction: Forged Aluminum/High-Strength Alloy.

• Ball Joint: Integrated and pre-lubricated for maintenance-free operation.

• Bushings: Natural rubber optimized for vibration dampening and noise reduction.

• Design: OE-style geometry for seamless fitment and alignment.

What’s in the Box

• (1) Front Driver Side (LH) Upper Control Arm with Ball Joint

• (1) Front Passenger Side (RH) Upper Control Arm with Ball Joint

Industry Cross-Reference Numbers

• Tesla: 102732200D, 102732200E, 102732200F, 102732700D, 102732700E, 102732700F

• Mevotech Supreme: CMS95136, CMS95137

• Dorman: 527-511, 527-512

• Beck/Arnley: 102-8358, 102-8359

Installation and Technical Tips

• Jack Mode: Before lifting the vehicle, you must engage "Jack Mode" via the center touchscreen. This prevents the air suspension system from attempting to self-level, which can damage the sensors or the air struts.

• Ride Height Torquing: To prevent premature bushing failure, do not perform the final tightening of the mounting bolts while the vehicle is suspended on a lift. The suspension must be at "normal" ride height (on the ground or ramps) when torquing the bolts to avoid putting the rubber bushings in a constant state of twist.

• Alignment Required: Replacing upper control arms alters your vehicle's camber and caster settings. A professional four-wheel alignment is mandatory after installation to ensure optimal tire life and the proper functioning of Autopilot/ADAS sensors.

• Hardware Inspection: Inspect the original mounting bolts for any signs of stretching or corrosion. If the hardware is compromised, it is recommended to replace it with grade-specific Tesla fasteners to maintain safety standards.