Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4

Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4

$202.82
Ask a Question

Add your personalization

Add your name, note or upload your customized idea image to personalise your item. Custom items cannot be returned or exchanged.

Hurry Up! Only 1 left in stock!

Estimate delivery times: 3-6 days (International)

Return within 45 days of purchase. Duties & taxes are non-refundable.

  • Sku: EBY-AM-134318332744
  • Available: instock
  • Vendor: AM Autoparts
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
Front Right CV Axle Shaft For Japan Built Models 1st VIN Digit J 13-18 RAV4
$202.82

Front Passenger Side CV Axle Assembly

Precision Drivetrain Restoration for Japan-Built Toyota RAV4 Models

Restore the efficient power delivery and smooth operation of your vehicle with this Front Passenger Side CV Axle Assembly. Engineered as a direct-fit replacement for the 2013–2018 Toyota RAV4, this axle is designed specifically for Japan-built models (identified by a VIN starting with the digit "J"). Whether you are driving a Front-Wheel Drive gasoline model or an All-Wheel Drive Hybrid, this assembly ensures consistent torque transfer and vibration-free performance.

Constructed with high-strength heat-treated joints, this axle is built to handle the rigorous demands of daily commuting and light off-road adventures. It features premium neoprene boots that offer exceptional resistance to temperature extremes and environmental contaminants, keeping the high-pressure molybdenum grease sealed within the constant velocity joints for an extended service life.

Fitment Verification and Vehicle Applications

This CV Axle is specifically for Japan-Built Models (1st VIN Digit J) in the Front Passenger Side position:

  • Toyota RAV4 FWD (LE, XLE, Limited, SE, Platinum, Adventure): 2013, 2014, 2015, 2016, 2017, 2018.

  • Toyota RAV4 Hybrid AWD (XLE, Limited, SE): 2016, 2017, 2018.

  • Critical Fitment Note: Please verify your vehicle's Country of Origin by checking the first digit of your VIN. This part is intended for models where the 1st VIN digit is "J".

Technical Specifications and Attributes

  • Compressed Length: 38.78 in (985 mm).

  • Outboard Spline Quantity: 30.

  • Inboard Spline Quantity: 24.

  • Inboard Joint Type: Male.

  • Axle Nut Thread Size: M22 x 1.5.

  • Axle Nut Socket Size: 32 mm (1.26 in).

  • Boot Material: Heavy-Duty Neoprene (Inboard & Outboard).

  • ABS Tone Ring: Not Included (Designed for vehicles using hub-based ABS sensors).

  • Grade Type: Standard Replacement.

What’s in the Box

  • (1) Complete Front Passenger Side CV Axle Assembly

  • (1) Replacement Axle Nut

Industry Cross-Reference Numbers

  • Toyota: 43410-42280, 43410-42281

  • Cardone New: 66-5446

  • GSP: NCV69106

  • TrakMotive: TO-8387

Installation and Technical Tips

  • VIN Verification: Before beginning the repair, confirm your VIN starts with "J". Axles for North American-built RAV4s often have different lengths or spline counts that are not interchangeable with Japan-built units.

  • Seal Replacement: It is highly recommended to install a new transmission output shaft seal during this service. A worn seal is likely to leak once the original axle is disturbed, leading to potential transmission fluid loss.

  • Nut Torque and Staking: Use a 32mm socket and a torque wrench to tighten the new axle nut to factory specifications. After torquing, ensure you "stake" the nut into the axle's keyway using a punch to prevent it from loosening over time.

  • Spline Lubrication: Apply a thin layer of high-quality grease to the splines before installation. This facilitates a smoother entry into the transmission and wheel hub and prevents the metal surfaces from seizing due to future corrosion.

For all orders exceeding a value of 100USD shipping is offered for free.

Returns will be accepted for up to 10 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item.

Otherwise, standard shipping charges apply. Check out our delivery Terms & Conditions for more details.

Returns will be accepted for up to 10 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:

– Received the wrong item.
– Item arrived not as expected (ie. damaged packaging).
– Item had defects.
– Over delivery time.
– The shipper does not allow the goods to be inspected before payment.

The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.

Recently Viewed

Don't forget! The products that you viewed. Add it to cart now.

People Also Bought

Here’s some of our most similar products people are buying. Click to discover trending style.