4-Piece Front and Rear Sway Bar Link Service Set

Precision Suspension Stabilization for Acura TSX and Honda Accord Hybrid

Restore the flat, responsive cornering and quiet ride of your sedan with this premium 4-Piece Sway Bar End Link Kit. Specifically engineered for the Acura TSX and the Honda Accord Hybrid, these links are the critical connection between your vehicle's stabilizer bars and the suspension control arms. Over time, the internal ball joints in factory links develop play or lose their lubrication, leading to persistent "clunking" or "rattling" noises over small bumps and decreased steering precision.

This kit replaces all four corners of your vehicle, ensuring balanced handling and consistent suspension geometry. Each link is manufactured with high-strength steel and features a low-friction ball joint design that provides smooth articulation while resisting the lateral forces of spirited driving. The boots are made from high-grade synthetic rubber to seal out the moisture and road salt that cause premature joint failure.

Fitment Verification and Vehicle Applications

This set is designed for the Front and Rear Axles on the following specific vehicles:

• Acura TSX: 2004, 2005, 2006, 2007, 2008.

• Honda Accord Hybrid: 2005, 2006, 2007.

• Compatibility Note: While these links fit all standard 2004–2008 TSX models, they are specifically validated for the Hybrid trim of the 2005–2007 Honda Accord. Please verify your vehicle's sub-model to ensure a perfect match.

Technical Specifications and Attributes

• Location: Front Left/Right and Rear Left/Right.

• Quantity: 4-Piece Complete Set.

• Construction: Heavy-Duty Forged Steel Housing.

• Hardware: Includes all necessary self-locking mounting nuts.

• Lubrication: Factory-sealed and pre-greased for maintenance-free service.

• Design: Direct-fit replacement that maintains factory sway bar alignment.

What’s in the Box

• (2) Front Sway Bar End Links (Driver and Passenger Side)

• (2) Rear Sway Bar End Links (Driver and Passenger Side)

Industry Cross-Reference Numbers

• Acura: 51320SEAE01, 51321SEAE01, 52320SDR003, 52321SDR003

• Honda: 51320TA0A01, 51321SDAA04, 52325S84A01, 06523S84A00

• MOOG Chassis Products: K90342, K90343, K90456, K90457

• Mevotech Supreme: MK90342, MK90343, MK90456, MK90457

• Beck/Arnley: 101-5300, 101-5301

• DIY Solutions: SUS03018, SUS06772, SUS06799

Installation and Technical Tips

• The "Hex" Trick: Honda and Acura stabilizer links often use a stud that will spin freely when you try to loosen or tighten the nut. Look for the internal hex (Allen) socket at the very end of the stud. Use an Allen key to hold the stud stationary while using a wrench to turn the nut.

• Neutral Ride Height: For the best service life, avoid fully torquing the links while the vehicle is up on jack stands. Lower the vehicle to the ground or onto ramps so the suspension is at its natural ride height before performing the final tightening.

• Penetrating Oil: Because these links are exposed to constant road spray, the factory nuts often rust in place. Spray the threads with a high-quality penetrating oil 30 minutes before removal to prevent the stud from snapping or the hex socket from stripping.

• Inspect the Bushings: While the links are off, grab the sway bar and try to shake it. If the bar moves easily within its frame mounts, your sway bar bushings are likely worn and should be replaced alongside these links to fully eliminate suspension noise.