Full Front and Rear Ceramic Brake Pad and Rotor Kit

Complete Axle Brake Overhaul for Toyota Corolla, Matrix, and Pontiac Vibe

This comprehensive brake service kit provides everything necessary to replace the braking components on both the front and rear axles. Featuring low-dust ceramic friction material and precision-machined rotors, this set is designed to restore factory-level stopping power while reducing noise and vibration. This kit is specifically for vehicles equipped with four-wheel disc brake systems.

Fitment Verification and Vehicle Applications

This kit is engineered for vehicles with 5-lug hubs and rear disc brakes. Please confirm your vehicle is not equipped with rear drum brakes before purchasing.

• 2009–2010 Toyota Corolla: Front and Rear (Models with Rear Disc Brakes only).

• 2014–2018 Toyota Corolla: Front and Rear (Models with Rear Disc Brakes only).

• 2019 Toyota Corolla: Sedan models; Front and Rear.

• 2009–2013 Toyota Matrix: Base models; Front and Rear.

• 2009–2010 Pontiac Vibe: L4 1.8L models; Front and Rear.

Technical Specifications and Attributes

These components are manufactured to meet precise dimensional standards to ensure proper caliper clearance and heat dissipation.

Rotor Specifications

• Rear Rotor Diameter: 259 mm (10.20 in).

• Wheel Lug Count: 5-Lug Pattern.

• Rear Rotor Venting Type: Solid (Non-vented rear design as per factory specifications).

• Front Rotor Venting Type: Vented (Internal cooling vanes for heat management).

Brake Pad Details

• Friction Material: Premium Ceramic (Copper-free).

• Benefits: Minimal brake dust, quiet operation, and high resistance to thermal fade.

• Hardware: Shims are typically pre-attached to the pads to dampen noise and prevent vibration.

What’s in the Box

• (2) Front Brake Rotors

• (2) Rear Brake Rotors

• (1) Front Ceramic Brake Pad Set (4 pads total)

• (1) Rear Ceramic Brake Pad Set (4 pads total)

Industry Cross-Reference Numbers

This kit utilizes components equivalent to the following manufacturer and aftermarket part numbers:

• Toyota (OE): 04465-AZ114, 044650R010, 4243112310, 446502220

• Raybestos: 580704, 980629, EHT1210H, EHT1354H, MGD1210CH

• DuraGo: BR900570, BR900756

• Bendix: PRT5818, PRT5854

• Wagner: BD126544, BD126558

• Hollander: 530-50246, 533-50231

Installation and Performance Maintenance

• Surface Preparation: Rotors may be shipped with a protective oil coating to prevent oxidation. Clean both sides of all four rotors with a dedicated brake parts cleaner before installation.

• Caliper Inspection: During installation, verify that the caliper slide pins move freely. Seized pins are a leading cause of uneven pad wear and reduced rotor life.

• Bedding-In Procedure: To ensure maximum performance, perform a series of moderate stops from 30 mph to 5 mph without coming to a complete stop. This process transfers a layer of ceramic material to the rotor surface, providing a smooth interface for future braking.

• Rear Disc Identification: If your Corolla or Matrix has a cable-operated parking brake that activates a drum inside the rear wheel, this kit will not fit. This kit is only for models where the parking brake operates the rear caliper directly.