2-Piece Front Lower Control Arm with Ball Joint Set

Complete Driver and Passenger Side Suspension Solution for Audi and Volkswagen

Restore the precision handling and ride comfort of your vehicle with this Premium 2-Piece Front Lower Control Arm Set. Engineered specifically for the MQB platform utilized by Audi and Volkswagen, these control arms serve as the primary structural link between the front wheels and the chassis. By replacing your worn factory arms, you eliminate common suspension issues such as steering wander, clunking noises over bumps, and uneven tire wear caused by degraded bushings or loose ball joints.

This kit provides a comprehensive refresh for both the left and right sides of the front axle. Each arm comes fully assembled with high-density rubber bushings and premium ball joints pre-installed, significantly reducing installation time and ensuring all critical wear components are replaced simultaneously for balanced performance.

Fitment Verification and Vehicle Applications

This 2-piece set is designed for the Front Lower position on the following models:

• Audi Q3: 2019, 2020, 2021, 2022.

• Volkswagen Arteon: 2019, 2020, 2021, 2022.

• Volkswagen Taos: 2022.

• Volkswagen Tiguan: 2018, 2019, 2020, 2021, 2022.

Fitment Note: These arms are designed for standard suspension configurations. Please verify your specific sub-model and production date, as specialized suspension options like Adaptive Chassis Control (DCC) or heavy-duty towing packages may require different bushing specifications.

Technical Specifications and Attributes

• Quantity: 2-Piece Set (Matching Pair).

• Position: Front Lower Left (Driver) and Front Lower Right (Passenger).

• Components: Includes pre-installed Ball Joints and Rubber Bushings.

• Material: High-grade reinforced steel for maximum structural integrity.

• Bushing Material: Ozone-resistant high-density rubber to minimize road vibration.

• Finish: Corrosion-resistant coating for protection against road salt and moisture.

• Grade Type: Standard Performance Replacement.

What’s in the Box

• (1) Front Driver Side Lower Control Arm (with pre-installed Ball Joint)

• (1) Front Passenger Side Lower Control Arm (with pre-installed Ball Joint)

Industry Cross-Reference Numbers

• Volkswagen / Audi: 3Q0407151G, 3Q0407152G, 3Q0407151L, 3Q0407152L, 3Q0407151S, 3Q0407152S, 3Q0407151AA, 3Q0407152AA, 3C0407366B

• Mevotech Supreme: CMS701166, CMS701167

• Dorman - OE Solutions: 527-069, 527-070

• Delphi: TC3440, TC3441

Installation and Technical Tips

• Proper Torquing Procedure: It is essential to perform the final tightening of the control arm mounting bolts only when the vehicle is at its normal ride height (wheels on the ground or supported on ramps). Tightening the bolts while the suspension is hanging can "pre-load" the rubber bushings, causing them to twist and tear prematurely.

• Mandatory Alignment: Because control arms dictate your front-end geometry, a professional four-wheel alignment is required immediately following installation. Failing to align the vehicle will lead to poor handling and rapid tire destruction.

• Hardware Inspection: Many modern Volkswagen and Audi models use "stretch bolts" (TTY - Torque to Yield) for suspension components. These bolts are designed for single-use only. It is highly recommended to replace the mounting hardware with new bolts to maintain proper clamping force.

• Taper Cleaning: Before installing the new ball joint into the steering knuckle, use a wire brush to clean the mating surface. Ensure the taper is free of rust and debris to allow the ball joint to seat fully and prevent future noise or loosening.