📦 2-Piece Front Brake Rotor Set: Premium OE-Replacement

Specifically Engineered for Nissan Frontier RWD (1998–2004)

If you are looking to restore the original braking feel and safety of your first-generation Nissan Frontier, this 2-piece vented rotor set is the foundational component you need. Designed to match the exact physical dimensions and cooling properties of the factory parts, these rotors are a direct "bolt-on" solution for the Rear-Wheel Drive (2WD) chassis.

🛠️ Precision Fitment & Vehicle Compatibility

The 1998–2004 Frontier generation saw several chassis variations. This specific set is tailored for the RWD models typically equipped with the fuel-efficient 2.4L engine.

• 1998 Nissan Frontier: Rear Wheel Drive; Front Driver & Passenger Side.

• 1999–2004 Nissan Frontier: L4 2.4L Engine; Rear Wheel Drive; Front Driver & Passenger Side.

🔍 Technical Blueprint & Critical Dimensions

Before beginning your teardown, verify these measurements against your existing equipment to ensure a seamless installation.

Rotor Geometry (Metric & Imperial)

• Outside Diameter: $260\text{ mm}$ ($10.24\text{ in}$)

• Overall Height: $40\text{ mm}$ ($1.57\text{ in}$)

• Center Hole (Hub Bore): $92\text{ mm}$ ($3.62\text{ in}$)

• Mounting Bolt Circle: $114\text{ mm}$ ($4.49\text{ in}$)

• Stud/Lug Count: 6-Lug Pattern

Thickness & Wear Limits

• Nominal (New) Thickness: $26\text{ mm}$ ($1.02\text{ in}$)

• Discard Thickness: $24\text{ mm}$ ($0.94\text{ in}$)

  • Note: If your current rotors measure at or below this limit, they cannot be resurfaced and must be replaced to prevent heat-related failure.

🏗️ Material Composition & Design Features

• High-Carbon Cast Iron: Manufactured from standard G3000-grade cast iron for an optimal balance of durability, heat absorption, and vibration dampening.

• Vented Cooling Channels: Features internal cooling vanes that pull air through the center of the rotor, significantly reducing the risk of "brake fade" during heavy hauling or repetitive braking.

• Smooth Contact Surface: Non-slotted/non-drilled face provides maximum pad-to-rotor contact for a quiet, consistent, and predictable pedal feel in daily driving conditions.

• Standard Replacement Grade: Meets or exceeds original equipment standards for fit and function.

📦 What’s Included in the Box

• (1) Front Driver Side Brake Rotor

• (1) Front Passenger Side Brake Rotor

📋 Comprehensive Cross-Reference Guide

These rotors are compatible with the following industry-standard part numbers:

• Raybestos: 96751, 96751FZN, 96751P, 96751R

• Wagner: BD125563

• Bendix: PRT5187

• Aimco / DuraGo: 31259 / BR31259

• Hollander: 530-58922

💡 Installation & Maintenance Tips

• Degrease Before Use: These rotors ship with a protective oil film to prevent rust. Clean both friction surfaces thoroughly with Brake Parts Cleaner before installation.

• ABS Transfer: Since these do not include an integrated ABS Tone Ring, you will need to transfer your existing tone rings if your vehicle is equipped with Front-Wheel ABS.

• Check Your Bearings: On these RWD models, the rotor is often serviced alongside the wheel bearings. It is highly recommended to inspect your inner and outer bearings and grease seals while the hub is disassembled.