6-Piece Front Suspension Overhaul Kit

Complete Handling and Stability Restoration for 2010–2013 Ford Transit Connect

Restore the original steering precision and ride comfort of your vehicle with this 6-Piece Front Suspension Kit. Engineered specifically for the unique demands of the Ford Transit Connect, this comprehensive set addresses the most common wear points in the front-end assembly. By replacing these interconnected components simultaneously, you eliminate steering play, reduce cabin vibration, and ensure even tire wear across the front axle.

This kit features Lower Control Arms with pre-installed, high-density rubber bushings designed to maintain alignment geometry under heavy loads. The included Lower Ball Joints and Sway Bar Links utilize high-strength forged steel and low-friction internal bearings to provide smooth suspension articulation and improved cornering stability. Every component is finished with a corrosion-resistant coating to protect against road salt and moisture.

Fitment Verification and Vehicle Applications

This kit is designed for the Front Driver and Passenger Side on the following models:

• Ford Transit Connect (All Trims): 2010, 2011, 2012, 2013.

• Fitment Note: This kit is specifically for the first-generation North American Transit Connect. Please verify your vehicle's production year to ensure compatibility.

Technical Specifications and Attributes

• Quantity: 6-Piece Matching Set.

• Control Arm Material: Heavy-Duty Stamped Steel.

• Bushing Material: Premium Elastomer (Pre-installed).

• Ball Joint Design: Press-fit style with high-articulation ball studs.

• Sway Bar Link Design: Direct-fit rod ends with durable dust boots.

• Grade Type: Standard Replacement / Performance Upgrade.

• Hardware: Includes necessary mounting nuts for the ball joints and sway bar links.

What’s in the Box

• (2) Front Lower Control Arms (Left and Right)

• (2) Front Lower Ball Joints (Left and Right)

• (2) Front Sway Bar End Links (Left and Right)

Industry Cross-Reference Numbers

• Ford / Motorcraft: 4T1Z3078A, 4T1Z3079A, 2T1Z3468A, 2T1Z5K484AA, MCSOE66

• MOOG: RK641539, RK641540, K500191, K750500

• Dorman: 521-761, 521-762, 531-824

• Mevotech Supreme: CMS40175, CMS40176, MS40857

• TRQ: PSA30109, PSA50231, PSA50232

• Delphi: TC1165, TC1166

Installation and Technical Tips

• The "Ride Height" Requirement: When securing the new control arm bushing bolts, it is essential to perform the final tightening only after the vehicle has been lowered back onto the ground. Tightening these bolts while the suspension is fully extended on a lift will cause the bushings to bind and tear prematurely once the van's weight is applied.

• Professional Alignment Mandatory: Because this kit replaces the primary pivot points of your front suspension, your vehicle's toe and camber settings will be altered. A professional 4-wheel alignment must be performed immediately after installation to ensure safe handling and prevent rapid tire degradation.

• Ball Joint Installation: Ensure the steering knuckle is clean and free of rust before pressing in the new ball joints. A small amount of anti-seize on the outer diameter of the ball joint can assist with seating and future serviceability.

• Hardware Inspection: While the suspension is disassembled, inspect your front struts and steering rack boots. Replacing worn struts at the same time as the control arms will maximize the overall improvement in ride quality.