Front and Rear Ceramic Brake Pad and Rotor Kit

Complete 4-Wheel Brake Overhaul for 1994 Acura Integra

Restore the balanced stopping power and factory-smooth feel of your vehicle with this comprehensive Front and Rear Brake Pad and Rotor Kit. Specifically curated for the 1994 Acura Integra, this all-in-one bundle replaces high-wear components on both axles simultaneously. By matching premium ceramic friction materials with precision-engineered rotors, this kit eliminates common issues such as steering wheel vibration, brake fade, and the unsightly "black dust" associated with traditional metallic pads.

This kit features Premium Posi-Bonded Ceramic Pads, which offer superior thermal stability and a silent operation across a wide range of temperatures. The front rotors are internally vented to rapidly dissipate heat during repeated stops, while the rear rotors are solid-cast to match factory specifications for optimal bias and parking brake performance.

Fitment Verification and Vehicle Applications

This kit is designed for the 4-Wheel (Front and Rear) configuration of the following models:

• Acura Integra (All Trim Levels): 1994.

• Critical Fitment Note: This kit is designed for vehicles with the 4-Lug hub configuration and a 10.30-inch (262mm) front rotor diameter.

• Compatibility Tip: While this kit fits most 1994 Integra models (RS, LS, and GS-R), please verify your front rotor diameter, as certain regional or specialized performance packages may utilize a different sizing.

Technical Specifications and Attributes

• Axle Coverage: Front and Rear (4-Wheel Kit).

• Front Rotor Diameter: 10.30 in (262 mm).

• Venting Type: Vented (Front) / Solid (Rear).

• Wheel Lug Count: 4-Lug Pattern.

• Friction Material: Low-Dust, High-Friction Ceramic.

• Bonding Type: Premium Posi-Bond (for maximum shear strength).

• Grade Type: Standard Replacement / Premium Upgrade.

What’s in the Box

• (2) Front Vented Brake Rotors

• (2) Rear Solid Brake Rotors

• (1) Set of Front Ceramic Brake Pads (4 pads total)

• (1) Set of Rear Ceramic Brake Pads (4 pads total)

Industry Cross-Reference Numbers

• Acura / Honda: 45022-ST7-000, 43022-SF1-010, 45022-ST7-A02

• Raybestos: 96068, 96087, PGD374C, PGD617C

• Bendix: PRT1439, PRT1471

• Wagner: BD61821, BD61982

• DuraGo / Aimco: BR3258, BR3295

Installation and Technical Tips

• Rear Caliper Compression: The 1994 Integra utilizes a "screw-in" style rear caliper piston for the integrated parking brake. You must use a brake piston tool to rotate the piston clockwise into the housing. Do not use a C-clamp, as this will damage the internal self-adjusting mechanism.

• Hub Surface Preparation: Use a wire brush to remove all rust and scale from the vehicle's hub faces. Even a small amount of debris can cause lateral runout, leading to "pedal pulsation" within a few hundred miles of installation.

• Slide Pin Maintenance: Inspect and lubricate your caliper slide pins with high-temperature silicone brake grease. Seized or sticky pins are the primary cause of uneven pad wear and overheated rotors on older Acura models.

• Bedding-In Procedure: To ensure a long service life and noise-free operation, perform 5 to 10 moderate stops from 35 mph down to 5 mph. This transfers a thin, uniform layer of ceramic material onto the rotor faces, which is essential for optimal performance.